Sangoma Analog Cable Pinout
Table of contents
No headersIf you ever need to create a cable to connect a Sangoma analog card (A200), please use the following instructions as a guide:
For all Sangoma Analog cards, note that you must use a narrow RJ11/4 tip. Standard Analog tips are RJ11/6 - please be careful when you source these parts from a local telco shop. You should crimp the RJ11/4 head on the end that will connect directly to the Sangoma analog card. The other end should be crimped with a standard RJ11/6 tip.
The pin-out is:
1-1 2-2 3-3 4-4
Begin inserting the wires at slot 2. You will leave slots 1 & 6 empty.
Cables are straight through for both FXO and FXS.
- Tag page
- What links here
